A pair of quick-reference engineering tools for looking up pipe dimensions and calculating volumes. For quick reference only; verify critical values against current standards.
A pair of quick-reference engineering tools for looking up pipe dimensions and calculating volumes. For quick reference only; verify critical values against current standards.
Note: OD and wall thickness are determined by NPS + Schedule per ASME B36.10/B36.19. The grade selection above does not change these values; it's shown for labeling the result only.
| inches | mm | |
|---|---|---|
| Outside Diameter (OD) | ||
| Wall Thickness | ||
| Inside Diameter (ID) |
Tip: diameter is usually easier to measure directly (e.g., from a spec sheet or caliper reading).
Tip: diameter is usually easier to measure directly (e.g., from a spec sheet or caliper reading).
Tip: diameter is usually easier to measure directly (e.g., from a spec sheet or caliper reading).
Tip: diameter is usually easier to measure directly (e.g., from a spec sheet or caliper reading).